ISCAR Press
 Basın Bültenleri
 
  2006 - 2007  
 
  TOOLING  
  •  SHRINKIN  
  •  MAXIN  
 
  DRILLING  
  •  Deep Drill  
  •  CHAMDRILLJET  
 
  TURNING  
  •  HELITURN TG  
 
  GRIP  
  •  TANG-GRIP  
 
  2005 - 2006  
 
  TOOLING  
  •  ISCAR SWISSCUT Tooling System  
 
  MILLING  
  •  4 Cutting corners, tangential geometry for Fast Metal Removal  
  •  New slotting cutters with tangential 4 cutting edged inserts  
  •  New chip splitting solid carbide endmills for high metal removal rates  
  •  A New family of double-sided rectangular inserts with 4 helical cutting edges  
  •  S845 F45SX.. - R16 A new family of tools for 45º face milling  
  •  OFMW 0706R10-FF – A combination for fast and economical face milling  
  •  FINISHRED - Revolutionary solid carbide endmills  
 
  INTERCHANGEABLE HEADS  
  •  EXCHANGEABLEHEADS for turn-mill machines  
 
  DRILLING  
  •  New upgraded DR drills with twisted coolant holes  
  •  BAYO T-REAM a new interchangeable reaming head system  
 
  TURNING  
  •  HELITURN LD  
 
  GENERAL  
  •  New ISCAR UPGRADES for Fast Metal Removal  
 
  GRIP  
  •  ISCAR is introducing an upgraded DO-GRIP parting insert  
  •  TRIB New triple edged groove milling inserts  
 
  2004 - 2005  
 
  TOOLING  
  •  SOLIDTHREAD  
 
  MILLING  
  •  16MILL  
  •  BALLPLUS Multifunction milling system  
  •  HELIPLUS  
 
  ISO-TURN  
  •  New MULTI-WEDGE clamp holders for ISO turning  
 
  TURNING  
  •  HELITURN  
  •  SWISSCUT  
 
  2001 - 2002  
 
  MILLING  
  •  The new tangential milling system with the butterfly-shaped insert  
  •  Economical milling-introduction  
 
  ISO-TURN  
  •  Wiper CBN inserts  
 
  2000 - 2001  
 
  TOOLING  
  •  CLICKFIT A rigid clamping system enhances tools performance  
  •  Adaptor extensions for CLICKFIT and FLEXFIT  
 
  MILLING  
  •  Plungers  
  •  FLEXFIT Modular shanks, adapters and milling heads system  
 
  DO-GRIP  
  •  New chipformer type "UT"  
  •  New HGN 3mm twisted insert  
  •  New DO-GRIP & SELF-GRIP tools  
  •  Holders for adaptors  
 
  CUT-GRIP  
  •  New GPV inserts for pulley "V" grooving  
  •  Wide blanks for special contours  
  •  New CUT-GRIP inserts for machining cast iron  
 
  FACE-MACHINING  
  •  PICCO CUT for face grooving  
  •  New HELIFACE tools for automatics, CNCs & screw machines  
  •  New blades for heavy duty face machining  
  •  The GDMM 8 mm "splitter" insert  
 
  ISO-TURN  
  •  Stainless steel machining  
  •  KNUX - profiling insert  
  •  New insert geometries and grades  
  •  Ceramic grades IN11, IN22 & IN23  
  •  CBN/PCD turning inserts  
 
  PASSPORT  
  •  New small boring PASSPORT kit  
ISCAR