| |
 |
| |
Optimizing Machining Sequence #2
Recommended machining sequence in finishing the part, using multifunction HELIFACE tools.
1. Groove at the initial diameter to the final depth of groove and continue face turning away from center to the tangential point
on the radius.
2. Finish major diameter toward the bottom and generate the radius.
3. Position the tool in rapid movement in the initial groove, continue face turning to center, without touching the machined roughing
steps on the wall.
4. Finish boring the minor diameter to the bottom up to final depth.
Note: When face grooving, reduce the speed by 40% in relation to that used in face turning.
|
|