ISCAR Product Lines>Turning
New Products > Chipformers for roughing
 
 
ChipformersForRoughing


Single-sided for roughing applications.
Feeds range from 0.25 to 1 mm/rev.
Depth of cut from 1.5 to 10 mm.









Double-sided trigon for roughing applications.
Feed range from 0.25 to 0.65 mm/rev.
Depth of cut from 2 to 7 mm.











Double-sided sharp cutting edge with a positive 13º chipformer rake angle. Used for machining high temperature alloys at ap < 6 mm.











Double-sided for roughing applications;
Feed range 0.25 mm/rev to 0.8 mm/rev.
Depth of cut from 2.00 mm to 10.0 mm.










Double-sided for roughing applications; Feed range 0.25 mm/rev to
0.8 mm/rev. Depth of cut from 2.00 to 10.0 mm.












Positive land and rake combined with positive radial edge inclination used for roughing of soft and ductile materials.