Page 135 - Demo

133GENERAL PURPOSE DRILLINGThe MD-DR-DH %u2026 carry standard SOMX indexable inserts with 4 cutting edges, providing an economical solution. A wide range of grades and chipformers SOMX inserts provide a solution for machining holes in a variety of materials. It is a known and proven design combined with the advantages of a modular system. Double-ended guide pads ensure the straightness of the bore and improve surface quality. When using MD-DR-DH %u2026, it is necessary to pre-drill flat bottom hole of 1XD minimum depth with a tolerance of H8. Used correctly, this drill head stands out with excellent straightness and surface finish. Recommended for low to medium feed machining.SOMX %u2026-DTDT chipformer for general useSOMX %u2026-GFGF chipformer for soft materialsSOMX %u2026-HDHD chipformer for carbon steel and soft materialsThe MD-MNC modular head is designed for machining ISO P and ISO K materials, equipped with a pilot exchangeable SUMO-CHAM drilling head (designated as ICP %u2026-MNC) and peripheral indexable inserts (designated as WCGX %u2026-W). This modular head allows for drilling without the need for a pre-hole, achieving a depth-todiameter ratio of up to 8xD. The MD-MNC combines cost efficiency with high precision, ensuring accuracy, cylindricity, roundness, and straightness of the machined hole. Recommended for medium to high feed machining.Pilot exchangeable drilling head ICP %u2026-MNCPeripheral indexable inserts WCGX %u2026-W